Anti-TF antibody is a Mouse of scFv class that binds to an TF.
Figure 1 Inhibitory characteristics of anti-tissue factor antibodies.
(a) Amidolytic activity of sTF:F.VIIa towards the small synthetic substrate Chromozym t-PA. Antibodies were incubated together with sTF (10 nM) and F.VIIa (10 nM) in HBS buffer, 5 mM CaCl₂ for 15 min. Chromozym t-PA (0.5 mM) was added and the rates of substrate cleavage were measured. The results were expressed as fractional activities (vᵢ/vo) (average of 3 experiments ± SD). (b) Prolongation of human plasma clotting by anti-TF antibodies. The antibodies (D3 Fab and control Ab were not tested) were incubated with TF reagent (Innovin) for 15 min, then added to human citrated plasma. The increase in clotting times is reported as the ratio of clotting times in the presence of antibody and baseline values. The results are the average of two independent experiments. (filled circle) D3, (open circle) D3 Fab, (x) 5G6, (filled square) 7G11, (open square) 6B4, (filled triangle) HTF1, (open triangle) isotype-matched control Ab
Kirchhofer, D., Moran, P., Chiang, N., Kim, J., Riederer, M. A., Eigenbrot, C., & Kelley, R. F. (2000). Epitope location on tissue factor determines the anticoagulant potency of monoclonal anti-tissue factor antibodies. Thrombosis and haemostasis, 84(12), 1072-1081.
Figure 2 Effects of anti-tissue factor antibodies on TF-dependent F.X activation in human plasma.
Relipidated TF₁₋₂₄₃ (0.4 nM) and CaCl₂ was used to initiate the reaction in citrated human plasma that was supplemented with increasing concentrations of anti-TF antibodies. A specific thrombin inhibitor was added to plasma to block thrombin activity. Timed aliquots of the reaction mixture were quenched in EDTA and F.Xa activity measured by adding S2765 and monitoring increase in absorbance at 405 nm on a kinetic microplate reader. The inhibited rates of F.Xa generation during the initial phase of 45 sec were calculated and expressed as fractional activity (vᵢ/vo). (filled circle) D3, (x) 5G6, (filled square) 7G11, (open square) 6B4, (filled triangle) HTF1, (open triangle) isotype-matched control Ab
Kirchhofer, D., Moran, P., Chiang, N., Kim, J., Riederer, M. A., Eigenbrot, C., & Kelley, R. F. (2000). Epitope location on tissue factor determines the anticoagulant potency of monoclonal anti-tissue factor antibodies. Thrombosis and haemostasis, 84(12), 1072-1081.
Figure 3 Inhibition of fibrinopeptide A (FPA) generation by anti-TF antibodies in a human ex-vivo blood flow system.
Antibodies were infused to blood flowing from the antecubital vein of human donors and were mixed in a mixing device without interruption of flow. The blood then entered plexiglass chambers containing coverslips with monolayers of TF-expressing human J82 cells. The shear rate on the cell layer was 65 s⁻¹ representing venous blood flow conditions. Coagulation initiated on the cell layer resulted in the generation of FPA which was quantified from blood taken at the exit of the chambers. The FPA concentrations in plasma were expressed in percent of control values. Each value is the average of 3-8 experiments except for the highest concentrations of D3 Fab and 5G6 (n = 1 and n = 2, resp.) and for two 6B4 concentrations (n = 2 for 1.5 μg/ml and 15 μg/ml). The average of all control values (n = 36) was 1348.6 ± 46.1 ng/ml (± SEM). (filled circle) D3, (open circle) D3 Fab, (x) 5G6, (open square) 6B4, (filled triangle) HTF1
Kirchhofer, D., Moran, P., Chiang, N., Kim, J., Riederer, M. A., Eigenbrot, C., & Kelley, R. F. (2000). Epitope location on tissue factor determines the anticoagulant potency of monoclonal anti-tissue factor antibodies. Thrombosis and haemostasis, 84(12), 1072-1081.
Figure 4 Prolongation of prothrombin time (PT) by anti-tissue factor antibodies
Antibodies were added to citrated human plasma for 5 min. Clotting was initiated by addition of relipidated human tissue factor reagent containing CaCl₂ (Innovin) and clotting times measured on an ACL 300. Prolongation of clotting times are reported as the ratio of clotting times in the presence of antibody and baseline values. The results are the average of two independent experiments. (filled circle) D3, (x) 5G6, (filled square) 7G11, (open square) 6B4, (filled triangle) HTF1
Kirchhofer, D., Moran, P., Chiang, N., Kim, J., Riederer, M. A., Eigenbrot, C., & Kelley, R. F. (2000). Epitope location on tissue factor determines the anticoagulant potency of monoclonal anti-tissue factor antibodies. Thrombosis and haemostasis, 84(12), 1072-1081.
Figure 5 Binding constants of anti-tissue factor antibodies to soluble tissue factor determined by surface plasmon resonance
Kirchhofer, D., Moran, P., Chiang, N., Kim, J., Riederer, M. A., Eigenbrot, C., & Kelley, R. F. (2000). Epitope location on tissue factor determines the anticoagulant potency of monoclonal anti-tissue factor antibodies. Thrombosis and haemostasis, 84(12), 1072-1081.
This is a product of Creative Biolabs' Hi-Affi™ recombinant antibody portfolio, which has several benefits including:
• Increased sensitivity
• Confirmed specificity
• High repeatability
• Excellent batch-to-batch consistency
• Sustainable supply
• Animal-free production
See more details about Hi-Affi™ recombinant antibody benefits.
Download resources about recombinant antibody development and antibody engineering to boost your research.
Select a product category from the dropdown menu below to view related products.
CAT | Product Name | Application | Type |
---|---|---|---|
TAB-258CL | Human Anti-F3 Recombinant Antibody (TAB-258CL) | ELISA | Human IgG |
TAB-276CQ-S(P) | Human Anti-F3 Recombinant Antibody; scFv Fragment (TAB-276CQ-S(P)) | ELISA, FC | Humanized scFv |
TAB-278CQ-S(P) | Human Anti-F3 Recombinant Antibody; scFv Fragment (TAB-278CQ-S(P)) | ELISA, FC | Humanized scFv |
TAB-276CQ-F(E) | Human Anti-F3 Recombinant Antibody; Fab Fragment (TAB-276CQ-F(E)) | ELISA, FC | Humanized Fab |
PABX-180 | Recombinant Human Anti-TF Antibody (D3H44) | WB, ELISA, FuncS | IgG |
There are currently no Customer reviews or questions for PABX-179-S (P). Click the button above to contact us or submit your feedback about this product.
For Research Use Only. Not For Clinical Use.
For research use only. Not intended for any clinical use. No products from Creative Biolabs may be resold, modified for resale or used to manufacture commercial products without prior written approval from Creative Biolabs.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.